Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Race Face Aeffect 35 Stem
$49.99
The RaceFace Aeffect 35 stem brings the advantages of a 35mm bar to the XC/Trail crowd at a mid-level pricepoint while maintaining a refined Race Face look. - Forged and machined from 6061 aluminum - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts - Stack Height: 39mm - Weight: 155g (60mm)
Race Face Respond
$49.99
RaceFace designed their Respond stem for DH/AM riders seeking big hit performance at an All Mountain weight and beer budget cost. It's engineered to offer an optimal combination of strength, stiffness, and weight. - Forged & blasted 6061 aluminum for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which could cause your bar to bend or break
Giant Contact OD2 Stem
$53.00
- 3D forged 2014 aluminum alloy with oversized box cross-section - Oversize 46mm wide 6061 alloy faceplate - Steel hardware - ± 8° rise requires fewer spacers - 1-1/8" steerer adapter included
Profile Design 1/Seventeen
$54.99
Simple, elegant, lightweight design can be run in negative or positive position for -17°/ 17° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 162g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±17°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 73° (±17°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm
Race Face Chester Stem
$54.99
- Forged & blasted 2014 alloy for high strength & fatigue resistance at a reasonable weight - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates ‘stress risers'
Zipp Service Course Stem
$56.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Race Face Aeffect R 35 Stem
$59.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
Race Face Chester DM 35
$59.99
The Chester 35 Direct Mount stem is a practical 2-piece design with big bold graphics and that legendary bomb-proof Race Face toughness baked right in. - The Chester 35 direct mount stem is an all new 2 piece direct mount design - Forged and machined from 6061 aluminum - Weight saving single bolt faceplate - Four bolt bar clamp holds bar securely in position. - Interlocking U-Shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts - Faceplate eliminates 'stress risers' which can cause your bar to bend or break
WeThePeople Hydra Stem
$60.99
Named after the multi-headed serpent from Greek mythology, the WeThePeople Hydra stem really is a beast of many heads. It's available in two rise and two clamping options, and utilizes shark tooth clamping inside the stem body to provide a vise-like grip. The hydra is one stem that won't let your bars slip any time soon. The hydra is one of the first stems on the market to be available in the 25.4mm oversize clamp option. Pair it up with any of our 25.4mm handlebars to have a truly indestructible front-end setup.
WeThePeople Index Stem
$60.99
WeThePeople's new frontload stem, the Index offers a taller 16mm rise, which allows you to run your bars as high as some topload stems, without having to compromise on the clean and simple frontload look. The wider, 48mm faceplate helps provides secure and safe clamping, and the sunken section on the top allows you to run your topcap flush with the stem. This is one smooth stem.
FSA Gossamer Stem
$62.99
Basic, clean, and dependable performance – that’s FSA's Gossamer stem. 6061-T6 aluminum is forged and then CNC machined to achieve the Gossamer’s shape. The four-bolt faceplate is cold forged and holds the bars with authority. Laser-etched graphics are the finishing touch. - Stack Height: 40mm - Weight: 154g
TruVativ Holzfeller Stem
$64.00 - $66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
Easton EA70 Stem
$64.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
Odyssey DGN Stem
$64.99
Using Odyssey's popular TL48 stem as a springboard, Tom Dugan's signature DGN stem is a classic top load design. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined
Odyssey RAFT Stem
$64.99
Using Odyssey's popular TL48 stem as a springboard, Broc Raiford's signature RAFT stem is a classic top load design. FEATURES - Six bolt clamping configuration - Headset pre-load bolt recess (32mm diameter) - 6061-T6 aluminum, CNC machined
TruVativ Descendant 35mm Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
TruVativ Descendant Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars—not that you’re worried about that kind of thing. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Colors: Black - Material: Al-7075 - Lengths: 40mm, 50mm, 60mm - Bolts: Steel - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Ritchey Classic C-220 Stem
$69.95
You really can have it all; Ritchey's WCS C-220 stem features revolutionary stiffness and classically inspired good looks, but it’s quick and easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The C-220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body ‘embraces’ the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality chromoly steel bolts are used throughout. - Material: 3d forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer diameter: 1-1/8" - Faceplate Width: 42mm - Silver Finish - 121g (110mm)
Promax Banger Stem
$69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Promax DA-1 Stem
$69.99
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
Promax Impact Stem
$69.99
The Impact is Promax's top-load BMX stem. They come in 48-, 53-, and 60-millimeter extensions and are cold-forged from the highest quality 6061-T6 aluminum then CNC-machined to refine the shape and further reduce weight. The “open” design keeps weight low while maintaining plenty of strength and ensuring your bars stay put. - Weight: 9.8oz. - Stack height: 30.5mm
Promax S-29 Stem
$69.99
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Promax S-35 Stem
$69.99
Promax takes handlebar control up a notch with their S-35 Stem. Its oversize 35mm handlebar clamp cranks up the cockpit stiffness without adding weight or sacrificing any strength. - 3D cold-forged and CNC-machined from 6061-T6 aluminum alloy
3T Apto Pro
$70.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts securely hold the stem in place.
Spank Oozy Trail Stem
$75.00
All Mountain strength and stiffness...trail tuned! Spank Industries' OOZY Trail Stem offers all the performance and confidence of a gravity stem, in a highly weight-sensitive, trail-tuned geometry package. 3D-forged and CNC weight-optimized, the OOZY Trail stem comes in popular lengths, with an ultra-short stack height and true zero degree rise. Chamfered barclamps reduce stress risers in the critical bar/stem interface, and ultra-light spacer and sealed top-cap (included), make set-up a breeze. The OOZY Trail Stem's characteristic hourglass sectional profile and wide stance enhance torsional stiffness and integrates beautifully with modern frame designs. Weight, performance, aesthetics and great value...the OOZY Trail Stem has it all. - Key technologies: MGR, chamfered bar clamp, "Snap Fit" sealed top cap - Material: 3D Forged MGR Alloy, CNC Weight Optimized - Length (mm): 50 / 65 / 75 - Rise (mm): 0 - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): +-150 (50mm) / +-170 (65mm) / +-180 (75mm) - Finish: Shot Peen anodized, CNC/Laser etched logos
FSA Metropolis Stem
$81.99
To meet your urban cycling needs, FSA brings you their Metropolis Stem. It features a clean-looking 2-bolt front-mounted faceplate and is made of 3D-forged aluminum for lightweight strength. The 30° rise puts you in an alert, upright riding position — ideal for navigating city streets. - Stack Height: 40mm - Weight: 180g
Paul Component Engineering Boxcar Stem
$89.00
The Boxcar Stem from Paul Components is the perfect combination of stiffness, strength, and reasonable weight. All screws are high-strength stainless steel with the popular T25 head. Made in Chico, California with US sourced 2024 aircraft alloy. - Stack height: 36mm - Weight: 155g (90mm)
Spank Spank Split 35 Stem
$89.90
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
Spank Spank Split Stem
$89.90
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
Ritchey WCS C220 84D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Ritchey WCS C220 Stem
$89.95
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
Ritchey WCS Trail Stem
$89.95
The Ritchey WCS Trail Stem represents Ritchey's first stem specifically designed for today's 5-6-inch travel trail bikes using wide bars. More than just a beefed-up version of other stems, with the Trail stem we revised the patented C260 clamp to a 220-degree version that fits a wider variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitor's designs. Using 3D Forged 2014 alloy, the WCS Trail Stem serves up superior strength while remaining lightweight. The extra-wide bar clamp takes stiffness to the next level, fits most riser bars, and ensures plenty of confident control out on the trail. - Material: 3D Forged 2014 alloy - Lengths: 35 - 110mm - Angle: Zero rise - Steerer Height: 45mm - Faceplate Width: 40mm - Steerer: 1-1/8” - Ritchey Blatte finish - 115g (70mm)
Race Face Turbine Stem
$93.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 31.8 mm - Stem Angle: -84 deg , +96 deg
Ritchey WCS Trail 35 Stem
$94.95
More than just a beefed-up version of Ritchey's other stems, the WCS Trail 35 stem features their patented C220 clamp fits a wide variety of riser bar bends and still packs a dramatic increase in stiffness and strength over competitors' designs. The 35mm clamp diameter takes advantage of the increased stiffness and power of larger diameter handlebars. - 3D Forged 2014 alloy for superior strength and lightweight - 220 degree, extra-wide bar clamp improves stiffness and fits most riser bars - Oversize 35mm bar clamp for use with 35mm OD handlebars - Material: 3D Forged 2014 alloy - Rise: 0° - Stack Height: 45mm - Faceplate Width: 40mm - 130g (70mm)
Giant Contact SL OD2 Stem
$95.00
• 3D forged 2014 aluminum alloy with oversized box cross-section • Oversized 46mm wide 6061 alloy faceplate • Titanium hardware • ± 8° rise requires fewer spacers • 1-1/8" steerer adapter included • Weight: 145 grams (100mm)
FSA Energy Stem
$98.99
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D forged from 2014-aluminum for great strength, with the final refinements carried out by CNC machining. Chromoly bolts complete the package.
Chromag HiFi
$99.00
Chromag's HiFi stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 200 grams - Low stack height
Syntace Force 109
$99.00
From road to mountain, Syntace's Force 109 stem offers a variety of lengths in a 6° rise with thoughtfully engineered features. It's oversized stem tube diameter offers increased stiffness, and titanium bolts shed unecessary weight. A 200 degree clamp face helps increase handlebar strength and fatigue life. - Stack height: 38.5mm - Weight: 118g (110mm)
Syntace Megaforce 2
$99.00
Syntace's Megafroce 2 stem is intended for all-mountain and downhill riding and comes in a range of sizes with a focus on torsional stiffness and weight savings. The 42mm wide bar clamp area stiffens up cockpits with bars wider than 700mm Titanium bolts help keep the weight low and strength high. - Stack height: 36mm - Weight: 132g (70mm)
Renthal Apex Stem
$99.95
- CNC machined 2014 aluminum body and 7075 aluminum clamps - 240 degree wrap-around, twin plate clamping system - External webbing to maximize structural strength - 118-158g including stainless steel bolts
Easton EA90
$99.99
Easton’s lightest aluminum stem is the choice of road racers and top XC pilots alike. The advanced EA90 aluminum tubing and 3D forging process results in a perfect blend of strength and weight. Easton’s patented DST distributes clamping forces more evenly over a larger area, making it the perfect stem for today’s lightweight aluminum and carbon handlebars. - Finish: Black Ano - Weight: 130g (100mm) - Rise: Varies - Clamp diameter: 31.8mm - Steerer: 1 1/8-inch - Length: 80mm, 90mm, 100mm, 110mm, 120mm, 130mm - Materials: EA90 alloy
Race Face Atlas 35 Stem
$99.99
RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build. - Four-bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
Race Face Atlas DM 35
$99.99
The RaceFace Atlas 35 direct mount stem is an all new 2-piece direct mount design. Super lightweight, low profile design with flush mount bolts and 5mm spacers kit to let you dial in your perfect set up. - Machined from 2014 Aluminium - Weight-saving single bolt faceplate
Race Face Atlas Stem
$99.99
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
Race Face Turbine 35 Stem
$99.99
- Intended for XC, Trail and All Mountain use - Machined to precision with 7075 aluminum for high strength & fatigue resistance at a very light weight - Interlocking 4 bolt bar clamp secures your bar and distributes loads away from bolts and into the body - Bar Clamp Diameter: 35mm - Stem Angle: -84 deg , +96 deg
3T Arx II Team Stem
$100.00
3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate. - Aluminum stem with 40mm stack height - Single M6 bolt clamps stem to fork steerer - T25 bolts on bar clamp - 120 grams for 110mm - Bar Clamp Diameter: 31.8 mm - S.H.I.S. Stem Clamp Diameter: 28.6mm - Weight: 120 grams (110mm)
Giant Contact DH Stem (0-degree)
$100.00
With its tough, forged aluminum construction, 4-bolt face-plate, and 52mm-wide clamp Giant's Contact DH Stem is lightweight strength and true DH durability. It offers point-and-shoot steering precision and adjustable reach so you can rally every track.
Chromag HiFi 35
$104.00
Chromag's HiFi V2 stem is light and extremely strong for the ultimate control and performance. The HiFi features a blended shape thanks to 3D forging. Chromag contours every surface for human contact and structural optimization. - 3D forging - 175 grams (35mm length) - Low stack height
Race Face Turbine R 35 Stem
$104.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
Renthal Integra 35
$109.95
Renthal's revolutionary Integra 35 stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
Renthal New Integra
$109.95
Renthal's revolutionary Integra stem combines high strength with ultra-low weight. The use of two independent, C-shape handlebar clamps allows the stem body material to be reduced to a minimum, while maintaining an incredibly stiff and strong structure. The ultra-wide, 64mm handlebar clamping area increases torsional rigidity and the use of just six bolts vastly reduces overall weight. In addition, the uninterrupted clamp on the underside of the handlebar eliminates stress risers found on most other clamps, which can lead to handlebar failure.
Zipp Service Course SL Stem
$112.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Syntace Flatforce Stem
$119.00 - $129.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Fizik Cyrano R1 Stem
$120.00
Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.
Chromag Ranger V2
$121.00
Strong, light and elegant. Chromag's longest running stem, the Ranger, has a refined body shape that represents their own advancement in 3D modelling and CNC profiling. The Ranger is stronger and stiffer for today’s increased demands with blended body features to increase performance with a more fluid look. The Ranger evolves with the same physical fundamentals, more flow, and increased strength. Starting at 140g, the Ranger is light yet extremely stiff for positive control at the front end.
Renthal Duo Stem
$129.90
- High strength and ultra-low weight combined with a low 40mm stack height make for a great all around stem - Stem is horizontally divided and machined in two pieces, enabling weight to be reduced to the absolute minimum without compromising strength
Zipp Service Course SL-OS Stem
$132.00
Zipp's Service Course SL-OS Stem provides lightweight strength and versatility to help you achieve the perfect riding position. At only 140 grams, the Service Course keeps your rig light while maintaining toughness for the long haul. Change the angle of the stem quickly and easily with the included shim that lets you tailor your comfort even more. And, the Service Course works with both 1 1/8-inch steerers and 1 1/4-inch. • Included shims allow the stem's rise to be adjusted to 4°, 6°, or 8° angles.
Hope Freeride Stem
$137.55
The Hope AM/Freeride Stem is light, stiff, and provides pin-point steering. It's proudly CNC'd in the UK from solid billet 2014-T6 and features opposing steerer and moto-style handlebar clamp for exceptionally rigid steering characteristics. - 10.9 DIN chromoly bolts - Weight: 135g
Chromag BZA 35
$147.00
Chromag's BZA 35 stem is strong, light, and burly. Featuring a 35mm bar/stem interface and weighing a perfect 165 grams this stem is light yet extremely stiff for positive control. - CNC profiling - Weight: 165g (50mm length)
Ritchey WCS Carbon Matrix C220 84D Stem
$159.95
You really can have it all—the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8 bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Steerer: 1-1/8” - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
Page 1 of 2 Next page