Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Tools

Park Tool Professional Tool Kit
$769.95
An expanded and evolved set of our finest professional level shop tools that addresses the changing tool demands of modern bikes and their mechanics. The PK-3 includes over 70 of our best tools and was put together with versatility in mind. A great way to outfit a pro bench or to set up a fabulous home workshop, the PK-3 is an impressive set of tools that can help you perform hundreds of repairs and maintenance tasks. Kit Includes: ATD-1.2 Adjustable Torque Driver AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm BBT-5/FR-11 Bottom Bracket/Cassette Lockring Tool for Campagnolo (12-tooth) BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive BCB-4.2 Bike Cleaning Brush Set BO-2 Bottle Opener CBW-1 Open End Wrench: 8/10mm CBW-4 Open End Wrench: 9/11mm CC-3.2 Chain Checker CCP-22 Crank Puller for Square Taper Cranks CCP-44 Crank Puller for Splined Cranks CM-5.2 Cyclone Chain Scrubber CN-10 Professional Cable and Housing Cutter CNW-2 Chainring Nut Wrench CP-1 Chain Whip Pliers CT-3.2 Chain Tool DAG-2.2 Derailleur Hanger Alignment Gauge DCW-1 Double Ended Cone Wrench: 13/14mm DCW-2 Double Ended Cone Wrench: 15/16mm DCW-3 Double Ended Cone Wrench: 17/18mm DH-1 Dummy Hub DP-2 Threaded Dummy Pedal FR-5.2 Cassette Lockring Tool: Shimano, SRAM, Sun Race GP-2 Pre-Glued Super Patch Kit HCW-15 36mm/32mm Headset Wrench HMR-8 Shop Hammer HT-8 8mm Hex Tool MLP-1.2 Master Link Pliers NP-6 Needle Nose Pliers OBW-4 Offset Brake Wrench OM-1 Overhaul Mat PAW-12 12" Adjustable Wrench PH-1.2 P-Handle Hex Wrench Set PW-4 Professional Pedal Wrench RR-12 Tape Measure SBC-1 Spoke, Bearing and Cotter Gauge SCW-13 13mm Shop Cone Wrench SCW-14 14mm Shop Cone Wrench SCW-15 15mm Shop Cone Wrench SCW-16 16mm Shop Cone Wrench SCW-17 17mm Shop Cone Wrench SCW-18 18mm Shop Cone Wrench SCW-19 19mm Shop Cone Wrench SD-SET Shop Screwdrivers (Set of 4) SP-7 Side Cutter Pliers SW-0 Precision Spoke Wrench: .127" SW-1 Precision Spoke Wrench: .130" SW-2 Precision Spoke Wrench: .136" SZR-1 Shop Scissors TB-2 Emergency Tire Boots TL-1.2 Tire Lever Set TL-4.2 Tire Lever Set TWS-1 Torx Compatible Wrench Set
Park Tool Bottom Bracket Tapping & Facing Set
$631.95
Park Tool's Bottom Bracket Tapping & Facing Set is a precision tool system which provides a piloted means of tapping the threads in the bottom bracket shell of a frame. After tapping, the taps act as guides to keep the included facing cutter perfectly square with the axis of the bottom bracket for cleanup of the faces of the bottom bracket shell. The BTS-1 includes English taps, 1.370" x 24 TPI right hand thread for the adjustable cup, and 1.370" x 24 TPI left hand thread for the fixed cup. Italian thread taps, 36mm x 24 TPI right hand thread (Part #693) for the adjustable and fixed cups, are available as accessories.
Pedro's Apprentice Bench Tool Kit
$550.00
Drawing inspiration from Pedro's Bench In a Box and Master Tool Kit, this extensive tool set includes 55 professional-quality tools packaged simply to ensure the best possible value. You won’t find a glorified fishing tackle box, but instead a wide variety of professional tools ready to tackle installations, overhauls, and repairs. The perfect kit for new shop mechanics or home enthusiasts. Includes: - L Hex Wrench Set - 9 piece - 6mm and 8mm Hex Driver - Y Wrenches - 2, 2.5, 3, 4, 5, 6 hex, T10, T25, T30 torx - L Torx Set - 7 piece - Tire Levers – Yellow (2) - Pro Chain Tool 2.0 - Equalizer Pedal Wrench - Vise Whip - Cassette Lockring Socket - Campy BB & Cassette Socket - Splined Bottom Bracket Socket - Freewheel Socket - Bottom Bracket Wrench - Cable Cutter - Cable Puller - Universal Crank Remover w/ Handle - Phillips #2 Screwdriver - Flat Blade 5.5 Screwdriver - Star Nut Setter - 1" & 1 1/8" - Magnetic Parts Tray - 13mm, 14mm, 15mm, 16mm Cone Wrench (2 Pieces Each) - 17mm, 18mm, 19mm Cone Wrench - Tape Measure - Pro Spoke Wrench - Black - Pro Spoke Wrench - Green - Pro Spoke Wrench - Red - Chain Checker Plus - Adjustable Wrench-10
Park Tool Rolling Big Blue Box
$499.95
Built to withstand the punishment of travel and constant use and molded from impact resistant polypropylene, the BX-3 features pallets with 70% more surface area than the BX-2.2. Easily transportable with the integrated wheels and extendable handle, this case was designed with the help of some of the world's best mechanics for optimal form, function and longevity. - Smooth rolling integrated wheels - Extendable handle - Dust and water resistant - Air pressure compensation valve - Custom designed tool-holding pallets with loops and pockets - Gas assisted lid struts for easy opening - Dual-sided upper and mid level folding pallet wings - Front tool pallet that stores safely inside during transport - Nominal dimensions: 23.4" x 17.3" x 9.3" (59.5 cm x 44 cm x 23.5 cm), 21.6 lbs. (9.8 kg)
Park Tool Disc Brake Mount Facing Set
$445.95
The DT-5.2 is engineered and built to accurately face front or rear disc brake mounts so they are precisely aligned to the rotor. - Faces any IS Mount, Post Mount, or new Shimano Flat Mount, including low clearance, chainstay mounts - Telescoping axle adaptors allow use with any configuration of open or thru-axle dropouts and dropout widths (including Boost 110, Boost 148 and all fat bike axles) - Includes two facing cutters: IS Mounts Post and Flat Mounts - Includes storage case
Park Tool TS-4.2 Professional Wheel Truing Stand
$426.95
Updated to fit an even wider range of hub, wheel and tire combinations with room to spare, utilizing a wider base structure and larger calipers. More accurate and easier to calibrate, the versatile TS-4.2 is solidly built to accurately self-center nearly any diameter wheel 16-inch to 29+ and any tire width up to 5-inches+. - Both uprights move simultaneously to always keep wheel centered in the stand - Accommodates tire widths up to 5-inches+ with or without brake rotor mounted - Speed knob to quickly change axle widths - Accommodates hub widths from 75mm to over 250mm - Precise operation and adjustability - Built in thru-axle adaptors - Machined, welded, assembled and calibrated in our factory in St. Paul, MN - Chrome plated and powder coated heavy gauge steel construction - Removable, replaceable nylon caliper tips to protect painted/anodized rims
Park Tool Trailhead Workstation
$399.95
A versatile repair center designed and built specially for the harsh conditions of the outdoors. The THS-1 can be bolted directly to an existing post, permanent structure or to the THP-1 Post (available separately). The weather-proof stand includes eight carefully chosen tools capable of helping with a wide variety of minor repairs and adjustments. The THS-1 also features an integrated, super stout cradle stand that gets both wheels off the ground making any job easier. A great addition to any trailhead, park, corporate campus, apartment building, school, bike shop or anywhere riders may need some help to get back on their bikes. Features: - All steel construction, plated then powder coated to withstand the elements - Tamper proof assembly fasteners - Includes eight tools specialty treated to increase durability outdoors and securely mounted on 1/8" galvanized, vinyl coated cable - 1.5-inch (3.8cm) tubular support arms, plated and powder coated, soft touch covers - Mounts to any post or flat surface (mounting fasteners not included) - Dimensions of tool box: 12.2 x 8.7 x 2.6-inch (31 x 22 x 6.6cm) - Tubes extend 17-inches (43cm) from mounting surface
Park Tool Bottom Bracket Facing Set
$385.95
Park Tool's Bottom Bracket Facing Set is designed to be a complete self-contained facing set, combining top-quality precision parts with ease of use. Simply install the threaded inserts using the facer handle, then insert the facing tool through the guides and install the tension spring and speed nut. After applying a liberal amount of cutting oil, the BFS-1 easily cuts the shell material, giving you a clean, faced surface. Now you're ready to install the bottom bracket. The English threading inserts are included. The Italian threading (36 x 24) inserts are available as an accessory, as part #688. Two are required.
RockShox BoXXer Charger Damper Upgrade Kit
$384.00
Now you can update your 2010+ BoXXer Race, Team, RC, R2C2 and World Cup with the Charger Damper Upgrade Kit. The Charger is RockShox’s insanely refined damper, and its sealed construction with an expandable rubber bladder ensures damping consistency, reduces vibration, and is almost 100 grams lighter than the previous BoXXer damper. Adjustment is easy and intuitive, with a single compression adjuster and a beginning stroke rebound adjuster with a factory set Rapid Recovery tune. The internal shim stacks can be re-tuned for light or firm compression and rebound settings. Includes damper, syringe, and suspension fluid.
Park Tool Hub Bearing Press Set
$344.95
- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations
Quarq ShockWiz
$329.00
ShockWiz is a suspension tuning system for air-sprung mountain bikes that combines high-tech hardware with an intuitive smartphone app. It's lightweight, durable and powered by a long-lasting coin cell battery, ShockWiz automatically records and evaluates suspension performance every time you ride. The ShockWiz app displays straightforward adjustments that unite bike, terrain and riding style. ShockWiz works for all mountain bike riders, regardless of their experience or bike's intended use. It works on hardtail and dual suspension bikes, and for all levels of skill, speed, and terrain. With ShockWiz, you know exactly how your suspension is performing – and how to make it better. Features & Benefits: - Automated tuning recommendations - Shock tuning score - a snapshot of how well your suspension is set up for you - Works on hardtail and dual suspension bikes. Works for Cross-Country, Trail, All Mountain and Downhill. - Inexpensive, replaceable CR2032 battery lasts for months - Waterproof and dustproof - IP67 rating - Two alternative hoses (included) offer a range of fitting options - Smartphone app is compatible with Apple and Android phones Essential Details: - ShockWiz is designed for all mountain bike riders, regardless of your experience or bike's intended use. - You can tune for every riding style: Efficient (pedaling), Balanced, Playful or Aggressive. - Advice for air pressure, spring rate, compression and rebound is displayed in the intuitive smartphone app. - In the box: ShockWiz hardware, two hoses, rubber mounting boot and zip ties.
Wheels Manufacturing Inc. Sealed Bearing Press
$325.00
- Installs 16 bearing sizes including 3 different bottom bracket bearings: 2437, 6000, 6001, 6002, 6003, 6801, 6802, 6803, 6804, 6805, 6806, 6900, 6901, 6902, 6903, 6904 - Includes T-handles with Acme threaded rods, wood base with dowels for holding adapters, 16 bearing installation drifts, 3 "speed spacers" and 2 linkage offsets for full suspension bearing installation - Made in the USA
Park Tool Blue Box Tool Case
$299.95
The BX-2.2 features updated pallet configuration and storage options to help you keep your tools secure and easily accessible. The expanded custom designed tool pallets, including dual-sided pallet wings, are all housed in a virtually indestructible composite travel case. Designed and built for the traveling mechanic who demands the best! - Custom designed tool-holding pallets with loops and pockets - Folding, dual-sided pallet wings - Front tool pallet that stores securely inside during transport - Dent-proof composite shell built around an aluminum frame - Key lock - Nominal dimensions: 19" x 14.85" x 8.5" (48.25 cm x 37.7 cm x 21.6 cm), 13.2 lbs. (6 kg)
Park Tool Adjustable Crown Race Puller
$269.95
- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork - Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences - Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm - Accepts steerers up to 430mm - All steel construction for long life
Park Tool Fork Threading Set
$268.95
Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.
Park Tool Right Hand Bottom Bracket Tap
$265.93
Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.
Pedro's Apprentice Tool Kit
$250.00
Inspired by Pedro's unrivaled MTK, the new Apprentice Tool Kit offers 22 handpicked professional tools enclosed in a high quality, blow-molded hard case. This ultra-portable tool kit leverages the versatility of Pedro's hand tools to provide 32 functions covering an impressive range of installations and repairs, making it perfect for the professional or enthusiast. Each tool has its own custom-designed location cut into durable EVA foam, keeping the kit organized and your tools easy to find. Designed for easy transport and efficient storage, the Apprentice Tool Kit is perfect for the car, taking to events, or a minimalist home shop setup. Tool List - 7pc L Hex Set w/ Holder: 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes - 8mm L Hex - Y-Torx, T10,T25,T30 - Tire Lever Pair - Yellow - Splined Bottom Bracket Socket - Cassette Lockring Socket - Bottom Bracket Wrench - Phillips #2 Screwdriver - Flat 5.5mm Screwdriver - Universal Crank Puller - Equalizer Pedal Wrench w/ 24mm Socket - Six-Pack Chain Tool with Spoke Wrenches (3.2, 3.3 and 3.5mm) - Cable Cutter - Cog Wrench - Toothbrush
Wheels Manufacturing Inc. Professional Bottom Bracket Tool Kit
$250.00
This is Wheels Manufacturing's new toolkit for installing, removing, and servicing Wheels Manufacturing bottom brackets. The kit includes their new bottom bracket socket tools for installing and removing Wheels Mfg. BB cups with the following spline patterns: 48.5mm 16-notch, 44mm 16-notch (may be compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ and FSA). It also includes sealed bearing extractors for 22mm, 24mm, and 30mm ID bearings. Includes - T-Handles with 1/2" threaded rod - (2) Universal bottom bracket drift (BB-OB) - (1) 48.5mm/44mm, 16-notch Bottom Bracket Socket - (1) 48.5mm, 16-notch Single Sided BB Socket - (1) 30mm ID sealed bearing extractor - (1) 24mm ID sealed bearing extractor - (1) 22mm ID sealed bearing extractor - (1) receiver cup - (1) 44mm receiver cup sleeve - (1) 42mm receiver cup sleeve - (1) 39mm receiver cup sleeve - (1) bearing pusher shaft - (1) 3/8" to 1/2" square drive adapter - Wood base
Wheels Manufacturing Inc. Sealed Bearing Extractor Set
$240.00
This Wheels Manufacturing Sealed Bearing Extractor Set removes sealed bearings with an inside diameter of 8mm to 30mm. Insert the extractor into the bearing, tighten one side with an Allen key, and the collet expands to grip the inside of the bearing. Tap the extractor out with a punch. - 12-piece set (Individual replacement extractors and parts are also available) - Made in the USA Set includes: - (1) Clear Plastic storage container - (1) 8mm ID Bearing Extractor - (1) 9mm ID Bearing Extractor - (1) 9.5mm ID Bearing Extractor - (1) 10mm ID Bearing Extractor - (1) 12mm ID Bearing Extractor - (1) 15mm ID Bearing Extractor - (1) 17mm ID Bearing Extractor - (1) 20mm ID Bearing Extractor - (1) 22mm ID Bearing Extractor - (1) 24mm ID Bearing Extractor - (1) 25mm ID Bearing Extractor - (1) 30mm ID Bearing Extractor - (1) Spare parts bag containing bolt sets for extractors
Park Tool Cutting Facer
$142.95 - $225.95
Park Tool has long provided some of the best cutting and machining tools in the bicycle industry. Their 690 Cutting Facers reflect their commitment to maintaining this high level of quality. Please read below for use and compatibility information specific to each size cutter: - 45mm (690): The 690 cutting facer is used on the HTR-1, HTR-1B, BFS-1, and BTS-1 cutting and facing tools. The facer has an outside diameter of approximately 45mm. - 57mm (690XL): The 690-XL is a larger version of the 690 facer for the HTR-1 Head Tube Reamer and Facer. It has a nominal outside diameter of 57mm. It may be used in conjunction with the 788 reamer. It is also used with the 767 Pilot or the 768 Pilot to face only the large diameter headtubes used with, "low profile," ZS-type headsets. - 65mm (690-XXL): The 690-XXL faces large headtubes. It has a nominal outside diameter of 65mm. Use the 690-XXL facer with the 750.2 Centering Cone Adaptor and 789 Reamer or 790 Pilot when facing head tubes with internal diameters of 55.95–55.90mm.
Park Tool Bottom Bracket Bearing Press Set
$209.95
The BBP-1 quickly and accurately installs bottom bracket bearings into press fit-type bottom bracket shells. - Quick release design for fast tool installation and removal - 12 precision-machined bushings (in 6 sizes) to fit these bottom bracket configurations: - 386EVO, BB30, BB86, BB90, BB92, BB95, BB121, BMX Mid, BMX Spanish, OSBB, PF41, Press Fit 24, Press Fit GXP, BBright Direct Fit, PF30 BBright Press Fit, Shimano Press Fit - Works on bottom bracket shell widths from 68mm to 150mm
Wheels Manufacturing Inc. Small Sealed Bearing Press
$200.00
Another indispensable tool for the professional bike shop, the Wheels Manufacturing Press-2 works with bearings that have an I.D. of 10mm or smaller (most front hub sealed bearing fall in this range). It features an aluminum base with 9 open bore and over axle adapters, and a quick release skewer. - Installs sealed bearing sizes 6801, 6802, 6803, 6900, 6901, R6, 688, 608, 609 - All parts are laser etched for easy identification
Crank Brothers Speedier Lever
$7.99 - $192.00
Crank Brothers puts their well-known design aesthetic to the humble tire lever with the Speedier Lever. Can we call a single piece of nylon revolutionary? First off, this thing is tough. It removes and installs wire-beaded DH tires, UST tires, and brand-new road tires easily, without breaking. The genius loop protects your knuckles! It installs tires too, without pinching the tube, just flip it and use the other side. And only one lever is needed to remove even the most recalcitrant tires. Oh Speedier Lever, where have you been all my life?
Park Tool Bearing Cup Press
$179.95
Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.
Pedro's Ratcheting Combo Wrench Set
$169.68
The Pedro's Ratcheting Combo Wrench Set features beautiful, compact, and durable spanner wrenches. The forged and polished wrenches feature a convenient combination of 6-point ratchet box-end and offset open-end. - Premium combination ratcheting box-end/open end wrenches set. - Durable, forged steel construction features 6-point ratcheting mechanism. - Includes: 8, 9, 10, 11, 12, 13, 14, and 15mm sizes in storage pouch.
RockShox BoXXer Solo Air Upgrade Kit
$169.00
Upgrade your BoXXer with RockShox's Solo Air spring with revised spring curve and air spring tunability with Bottomless Tokens (4 included in package). This kit is compatible with BoXXer World Cup forks from 2011 to 2014 (serial number later than 16T11XXXXXXX).
Park Tool Dial Indicator Gauge Set
$152.95
Park's Dial Indicator Gauge Set mounts to their TS-2 or TS-2.2 Truing Stand (sold separately). The set makes it easy to view and correct a wheel's lateral and radial run-out within a tolerance of .01mm. Compared to going by the gap between the truing stand pointer and rim, having gauges that put a number on the clearance makes wheel truing easier and more accurate.
Park Tool Reamer
$152.95
Park Tool offers premium-quality reamers for nearly any bicycle standard. The reamers below are designed to quickly, accurately, and precisely ream headtubes when used with Park's Head Tube Reamer (HTR), ensuring a perfect headset fit and prfoessional-quality bicycle build. Choose the correct reamer for your application using the following information: - 751.2: This reamer is sized to 30.1mm. This allows a 0.1mm interference fit when pressing the 30.2mm headset of the “Euro” one-inch standard. - 754.2: This reamer is sized to 33.9mm. The allows a 0.1mm interference fit when pressing the 34.0mm headset of the 1-1/8" standard. - 788: This reamer is sized to 43.95mm. It reams head tubes to accept “internal” headset cups with 44.05 - 44.10mm O.D. (1-1/8 ZS standard). It is used with Park Tool's 690-XL Facing Cutter and 750 Centering Cone. - 738: This reamer is sized to 52.1mm. It is used to ream head tubes using the 1-1/2" integrated headset standard. It is used with Park Tool's 690-XL Facing Cutter and 750.2 Centering Cone Adapter. - 789: This reamer is sized to 55.95mm. It is used to ream head tubes to accept “internal” headset cups with 56.00–56.10mm O.D. (1-1/2 ZS standard). It is used with Park Tool's 690-XXL Facing Cutter and #750 Centering Cone Adaptor. - 799: This reamer is sized to 47mm. It is used for cutting the lower head tube on frames using an IS47 bearing for a 1-1/4" integrated headset. It cuts a 45-degree bearing set shoulder.
Pedro's Starter Tool Kit 1.1
$150.00
The Starter Tool Kit 1.1 is designed for the aspiring mechanic looking to get started with the right tools and room to grow. The kit starts with our Burrito Tool Wrap. This versatile wrap keeps your tools organized and protected in a durable, ultra-portable design with twenty pockets, waterproof exterior, and space for tools up to 13.75 inches (350mm) in length. Next we fill the Burrito with the essential tools needed by every mechanic. Finally, we round things out by leaving nine extra spots to add tools as you learn new skills and tackle new challenges. Includes: - 7pc L Hex Set w/ Holder: 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes. - 8mm L Hex - Tire Lever Pair - Yellow - Cassette Lockring Socket - Phillips #2 Screwdriver - Flat 5.5mm Screwdriver - Pro Travel Pedal Wrench w/ 24mm Socket Driver - Six-Pack Chain Tool with Spoke Wrenches (3.2, 3.3 and 3.5mm) - Cable Cutter - Pro Chain Whip with Integrated Fixed Gear Lockring Wrench - Toothbrush
Pedro's Demi Torque Wrench
$135.00
Torque wrenches have become an essential bicycle tool. The increase in carbon fiber bikes and components have driven the need. While carbon fiber allows for more optimal design and provides a far higher strength-to-weight ratio compared to steel and aluminum, it is also more susceptible to crushing and cracking when improperly set up. Pedro's Demi Torque Wrench is designed to handle the low-to-middle end of the torque range, adjustable from 3-15Nm, This smaller size torque wrench is perfect for working in tight spaces and fits nicely in the hand. This click-type torque wrench makes an audible "click" when desired torque is reached and is quickly set using a micrometer-style dial and simple locking mechanism. The Demi Torque Wrench features a quarter-inch reversible ratcheting drive, heat-treated steel construction for accuracy, strength, and reliability, and is accurate to within +/- 4 percent. - Features a quarter-inch reversible ratcheting drive and heat-treated steel construction - Quickly set torque using a micrometer-style dial and simple locking mechanism - Essential for modern carbon fiber frames and components - Smaller size perfect for tight spaces and easy handling - Adjustable from 3-15Nm
Page 1 of 20 Next page