Brakes/Levers/Pads

Replacement hoods for your RRL levers.

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

- Mountain-bike shifters built into linear pull-compatible brake levers - Aluminum - Left: triple chainring; Right: 8-speed - Cables and housing included

•Mountain and road touring cantilever design •Forged aluminum construction •Linear spring with quick tool adjust •185g each

• Compatible with most cantilever and u-brake systems • Hex nut type • All weather compound

Shimano's disc rotors provide a sturdy and reliable braking surface to slow you down. The design is optimized to clear mud and dirt from the system for all-conditions braking. Continuously cooling itself, this rotor helps keep brake power consistent and improves pad life.

The Shimano BL-MT200 Hydraulic Disc Brake Lever and BR-MT200 Disc Brake Caliper - Brakes are pre-bled - Hydraulic hose included - Rotor not included

Shimano Alivio hydraulic disc brake sets offer reliable and powerful braking, along with pre-bled hoses for convenient installation. - BL-MT200 hydraulic disc brake lever - BR-MT200 hydraulic disc brake caliper - Rotor sold separately

This Shimano Alivio BL-T4000 V-Brake Lever Set is compatible with all long-pull brakes, including linear-pull brakes and mountain-style mechanical disc brakes. - Compatible with V-brakes and MTB mechanical disc brakes - Adjustable reach - Brake Lever Use: Pair - Cable Head: Mountain - Brake Lever Actuation: Long Pull

Shimano Altus hydraulic disc brake and lever sets feature an entry-level design that's ideal for beginner riders and riders with smaller hands. - The brake lever's versatile design matches numerous bike styles - Braking power is adjusted for entry-level riders - Pre-bled brakes for easy, quick, and clean installation

Shimano BR-M375 Mechanical Disc Brake Caliper - Pad adjust tool size unified to 5mm allen key - Quick/fast assembly - Light braking operation for easy/long riding - Clean cable routing in combination with both chain stay and seat stay mount - Brake power same as BR-M416A - 20% pad clearance increase - Cable actuated - Single 74mm caliper - For use with Linear-pull MTB levers - B01S Resin Pads - Rotor not included - Frame or fork mount adapter and rotor not included - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull

Shimano's SM-RT64 disc brake rotors deliver powerful and consistent braking performance in all riding conditions. SHimano's Center Lock mounting system makes installing and removing disc brake rotors quick and easy thanks to the spline mount and lock ring design. - Compatible with both resin and metal pads - Includes external type rotor lockring

Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.

Shimano Deore XT RT-MT800 Center Lock disc brake rotors feature an advanced heat-dissipating design. - Rotor construction uses Shimano Freeza technology to boost heat dissipation and reduce fade - Quick and easy installation with spline mount and lock ring (included) - Compatible with metal and resin pads

With a focus on reduced weight and cross-country tuned stopping power, Shimano SLX M7120 brakes provide intuitive modulation so that you can explore your limits with confidence. The BL-M7100 levers feature an optimized lever axle position, an additional handlebar contact point for greater stiffness, and refined ergonomics for rider comfort. At the caliper end, the BR-M7120 4-piston caliper is optimized for the toughest enduro trails. - 10% stiffer than previous generation M7000, even under high-temp conditions - Quicker brake engagement with shorter free stroke - Tool-free lever reach adjustment - I-SPEC EV Clamp Band enables optional integrated shifter setup - Includes finned metal pads

Intrinsically designed to function seamlessly with the SL-4700 shift lever, The right braking solutions for every type of rider, comfortable and ergonomic lever profile. - Adjustable reach - Brake cable and housing set included - Compatible with V-brakes, road calipers and road mechanical disc brakes - Adjustable lever reach and transmission ratio - Aluminum construction with anodized finish - Compatible with road bike brakes, v-brakes, and road disc brakes - For handlebar diameter 22.2 mm

The Shimano Deore XT BR-M8100 disc brake caliper features 2 pistons for powerful braking. - The BR-M8100 2-piston brake caliper is optimized for cross country riding styles - Finned pads help to keep brakes cool - One Way Bleeding technology allows for easy maintenance - Brake Caliper Type: Post Mount - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: Mineral Oil - Pad Compound: Metallic

Stainless steel rotor designed for smooth and quiet braking with any disc brake caliper.

SRAM's Force CX1 ErgoDynamic levers are descended from the top-end RED, representing SRAM's attempt at perfecting the interface between cyclocross rider and bike. Designed for a 1 x 11 setup, this left-side, brake-only carbon lever is simple and effective. The ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar. For optimal feel, you can also set your lever reach to fit your hands thanks to Reach Adjust.

Guide T brings consistent performance and reliable stopping power thanks to a revised lever design and lightweight four-piston caliper. Featuring SRAM's Directlink lever, updated master cylinder and timing port closure, all combined to provide a more positive braking system. - Bleeding Edge, drip-free bleed port closure and adaptor to minimize fluid loss - Heat Shield technology to reduce caliper fluid temperature and prevent loss of braking power - MatchMaker compatible for a clean and simplified look - Ambidextrous lever mount design - Lightweight 4-piston dual-diameter caliper - Includes steel-backed organic pads - Front includes 950mm hose - Rear includes 1800mm hose

Heavyweight performance in a lightweight package. Level TL packs the same XC and trail-optimized power delivery into a brake set that won’t break the bank. This brake matches an alloy DirectLink lever to a lever body that contains the same technology found in the Level TLM, Level Ultimate and Guide series of brakes, for reliability and consistency you can count on.

SRAM road disc brake pads are designed for use with SRAM road hydraulic disc brakes (HRD). - For use with Level Ultimate & Level TLM Brakes - Pad Material: Organic - Type: Road/CX - Includes guide pin, clip, & pad spreader

Original equipment pads for no-compromise disc brake performance. - Pad Shape Number: 37

SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide and G2 disc brakes.

• All weather compound • Fits most 50mm road caliper brakes • Available in Clear or Black models

Converting from V-brake to disc? Plug the holes with Origin-8 Boss Plugs. Boss plugs provide a finished look to your brake conversion while also preventing moisture and debris from getting into your bike. - Fits into fork brake boss holes for V-brake to disc conversion

Converts CenterLock hubs to accept 6-bolt rotors - Available for standard Quick Release as well as Thru-Axle hubs - Extruded alloy collar with CNC shoulder pins and lock ring - Eliminates the need for rotor bolts

Origin-8's Pro Pulsion Cantilever Brake provides quality stopping power on a budget for cyclocross and touring bikes. It features forged aluminum construction and a spring tension adjuster for easy set up.

- Suitable for heavy use applications - Excellent in extreme weather conditions - Superior performance at high temperatures - Virtually unaffected by rain or snow - Exceptional pad life - Pad Style ID: 31 - Compatibility: Shimano M8020/M820/M460 / TRP Quandiem - Pad Material: Sintered - Backplate: Steel